Young larvae of various thrips species and eggs and larvae of whitefly.
Do not use in tomato.
How it works
|Pack size||50,000 predatory mites.|
|Presentation||500 ml bottle.|
Directions for use
- Turn and shake the bottle gently before use
- Press in the centre of the cap to open the dosage hole
- Sprinkle material on leaves or pour into Diboxes
- Make sure the material remains on the introduction site for at least a few hours after introduction
- Can also be applied with (Mini)-Air(o)bug
The dosage of Swirski-Mite depends on climate, crop and pest density and should always be adjusted to the particular situation. Start introduction as soon as the first pest mites are detected in the crop. Introduction rates typically range from 25-300 per m2/release. Releases should be repeated if necessary. Consult a Koppert advisor or a recognized distributor of Koppert products for advice on the best strategy for your situation.
Amblyseius swirskii is most effective at temperatures between 20 and 32°C (68 and 90°F). It is not effective at temperatures below 18°C/64°F. Amblyseius swirskii is sensitive to relative humidity below 60%.
Do not combine with other generalist predatory mites. Can be combined with Orius spp. and whitefly parasitoids.
Application of this product can cause sensitization or allergic reactions, we therefore advise to take the necessary precautions.
Pesticides can have (in)direct effects on biological solutions. Find out which pesticides have side effects on this product.
Storage time after receipt
In the dark, provide ventilation to prevent CO2 accumulation.
"The general conditions of Koppert (Koppert B.V. and/or of its affiliated companies) apply. Only use products that are permitted in your country/state and crop. Check local registration requirements. Koppert cannot be held liable for unauthorized use. Koppert is not liable for any loss of quality if the product is stored for longer than recommended and/or under incorrect conditions."